Sump Pump Review Of Popular Manufacturers

Little Giant 5.5-ASP, 1/4 HP, 35 GPM - Submersible Sump/Utility Pump, 25' power cord (505701)

 Submersible Sump/Utility Pump
Automatic, 1/4 HP sump pump. 1-1/4" FNPT discharge. Includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pump operates in 7" to 10" depth of water and shuts off at 2"-5". For use in basement sumps and other general wastewater removal.

Little Giant 5.5-ASP, 1/4 HP, 35 GPM - Submersible Sump/Utility Pump, 25' power cord (505701) Features:
• 1/4 HP Shaded Pole Motor, 25' Power Cord
• Handles up to 3/8" solids
• Polycabonate cover, Zinc motor housing, and Polypropylene volute
• 40 GPM @ 1' of Head
• 25' (7.6m) Maximum Head
• 1-1/4" FNPT (31.7mm) Discharge
• Includes Garden Hose Adapter
• Automatic operation with built-in snap action float switch
• 7"-10"(17.8cm-25cm) On-level and 2"-5" (5.1cm-12.7cm) Off-level

Little Giant 5.5-ASP, 1/4 HP, 35 GPM - Submersible Sump/Utility Pump, 25' power cord (505701) Specifications
• Flow 40 GPM @ 1' of Head
• Cord Length 25'
• Shut Off 25'
• Voltage 115
• Hertz 60
• Amps 8.5
• Watts 660
• Weight 11 lbs.
• Height 10.75"
• Width 6.0"
• Length 8.88"

Details and Features

Manufacturer and Model: Little Giant 5.5-ASP

Storm Pro

The StormPro sP3301 Flood Control System is a heavy duty 1/3 HP Sump Pump, complete with a battery back-up power solution. The included Sump Pump is powerful enough to be used as a primary sump pump, and can be installed as a new pump or installed as a replacement

of any existing primary sump pumps. Alternately, the sump pump can be used as a secondary pump as a back-up to any main or existing sump pump.

The included back-up powerpack is powerful enough to provide back-up power to the included sump pump as a primary or secondary pump for up to 9 hours.* The back-up powerpack stores household electricity in an internal battery and provides instantaneous power to the sump pump when utility power fails. The StormPro back-up powerpack is a clean, quiet, smart alternative to a generator, produces no emissions and is safe to operate indoors.

After installing and configuring the StormPro Sump Pump as your primary or secondary pump, simply plug the sump pump into the StormPro PowerPack and plug the powerpack into a standard wall outlet. Once your sump pump is connected to the powerpack , the powerpack will continue to use your utility power until a power failure is detected. Once a power failure is detected, the powerpack will instantaneously begin to supply standard household electricity to the connected sump pump. Once utility power is restored, the powerpack will automatically switch the sump pump to utility power and immediately begin to recharge the integrated battery in anticipation of the next power failure.

How It Works

Includes everything you will need to instantly provide back-up power out of the box.

• (1) 1/3 HP Heavy Duty Sump Pump

• (1) Fully Adjustable SPI Vertical On/Off Float Switch

• (1) Power Head; built-in 600w modified sine wave inverter with 5 amp charger

• (1) 120 amp-hour Sealed Lead Acid AGM battery

Main Features

• 1/3 HP, 4.5 amp Heavy Duty Sump Pump with on/off float switch

• High Efficiency, low wattage, delivers up to 3000 feet away 

• Operates on AC or DC power

• Installs as primary or secondary sump pump

• Automatic Transfer to/from back-up power

• Automatic Charger and Battery Monitoring System

• UL/CSA listing ensures compliance and reliability

• No emissions, no exhaust, no moving parts, silent operation

Flotec 1/3 HP 3,600 GPH Sump Pump Pedestal #FPPM3600D-01

The pedestal pump comes in thermoplastic and cast iron construction. Top inlet prevents loose debris in sump pit from entering pump. Superior pumping performance in a pedestal design in rugged cast iron and stainless steel is engineered for the easy installation. Automatic submersible sump pumps provide reliable protection and performance against flooded basements. Allows for smaller sump basins.

mfr: STARITE INDUSTRIES FLOTEC 1/3 H.P. PLASTICPEDESTAL SUMP PUMP Corrosion-resistant construction features plastic volute, impeller and column. Replaces any existing brand of pedestal pump. Top inlet prevents loose debris in sump pit from entering pump. Features industry mechanical switch for easy service. 1/3 HP, 115V, 5 amp motor with automatic thermal overload protection. 6' power cord with 3-prong grounded plug. SIZE 1/3 H.P. Shipping Size 7.25 x 8.25 x 33.75

Flotec Floodmaster Submersible Sump Pump - 6000 GPH, 3/4 HP, 1 1/2in., Model# FP0S6000A-08

3/4 HP 115 Volt, motor
Housing for durability and corrosion resistance
11/2in. suction port
1 1/2in. discharge port
Moves 6000 GPH@ 5-ft. head; 3800 GPH @ 15-ft. head

Features rust-resistant thermoplastic volute and housing, tough polycarbonate impeller and thermally protected, oil-filled motor. Vertical float switch provides reliable operation and allows installation in 13in. basins. High-capacity 1 1/2in. NPT discharge. Will replace most pedestal pumps with no plumbing changes. 14in. H x 7in. W x 9.5in. L. UL listed. Limited lifetime warranty. U.S.A.

The Grundfos AP12-1M25 1/2 HP Sump Pump.

SPECIFICATIONS - Grundfos AP12-1M25 1/2 HP Sump Pump:
• 1/2 HP, 115 volt, single phase
• Capacities to 78 GPM
• Heads to 33 feet
• Discharge size 1-1/2" female NPT
• 25' power cord
• Solids 7/16" maximum
• Fluid temperature range of 32°F to +131°F
• Minimum pumping level of 1-3/8"

APPLICATIONS - Grundfos AP12-1M25 1/2 HP Sump Pump:
• Basement Sumps
• Dewatering
• Water Transfer

FEATURES and BENEFITS - Grundfos AP12-1M25 1/2 HP Sump Pump:
• Lightweight
• Corrosion resistant
• Field replaceable power cord
• Continuous duty when fully submerged
• Manual operation

MATERIALS OF CONSTRUCTION - Grundfos AP12-1M25 1/2 HP Sump Pump:
• Stainless Steel
Details and Features
Manufacturer and Model: Grundfos AP12-1M25


EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump, 1/2 HP, 3 x 460

The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal.

EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump Features:

• High quality stainless steel
• 2" solids handling
• Single and three phase models available
• Motor is 2 pole, dry submerged, rated continuous duty
• Class F motor insulation
• 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation
• Manual operation
• Auto float switch is mechanical/non-mercury
• NPT thread discharge 1-1/2"
• Double mechanical seal with viton elastomers
• Shielded ball bearings 50,000 hour
• Vortex impeller
• Thermal overloads (single phase models)
• Flows to 185 GPM, heads to 65 feet
• 1/2 Horse Power
• 3 Phase
• 460 Volts

EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump Applications:

• Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns
• Quickly removes water from swimming pools, spas, hot tubs and other water storage structures
• Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits
• Create decorative waterfalls and fountains or other water projects throughout the garden
• Wherever you need to move water from one place to another

*Details and Features
Manufacturer and Model: EBARA EPD-5MT4
Color: Stainless Steel